In most Hills District homes, the return air grille sits in a hallway or upstairs landing ceiling, drawing air back from the whole house to the indoor unit. Behind it is a filter, and behind that, a chamber or duct leading to the unit. Because every bit of air passes through here, the return side collects more dust, hair and lint than any other part of the system. A clogged filter or dusty chamber reduces airflow across every zone, not just one room.
We clean the return grille, the filter and the chamber or duct behind it, and check that the filter sits snugly in its frame. Where filters are worn or damaged, we can suggest a replacement. Zone motors and dampers are the other half of this service. These small motorised flaps in the ducts open and close to send air to the zones you choose on the controller. We run each zone, check that its damper opens and closes freely and look for signs of a motor that is sticking, slow or not responding.
A damper stuck half-open or closed explains many complaints about one end of the house never getting warm or cool. Cleaning around the damper sometimes frees it. If a motor has failed or needs adjustment, we let you know what we found so your air conditioning installer can replace or reset it, often a quick job once the cause is clear.