A typical two-storey home in Kellyville or Bella Vista might have a single indoor unit in the roof feeding three or four zones: upstairs bedrooms, the main living area, a media room and perhaps a study or guest wing. That one unit pushes air through a long network of ducts, some running across the whole length of the house. The further a run goes, the more chance dust has to settle along the way, and the less likely anyone is to have looked inside it since the house was built.
We start by working out how your system is laid out: which outlets belong to which zone, where the main trunk runs and how the return air is arranged. From there we clean zone by zone, connecting a filtered negative-air machine and using rotary brushes to work each duct back toward the extraction point. Outlets are removed and cleaned as we go. The long upstairs runs to the far bedrooms get exactly the same treatment as the short ones over the kitchen, and the return air and filter are cleaned at the end so the whole system starts fresh.
Once everything is back together, we run the system through each zone to check that air is reaching every outlet and that the zone controls are switching properly. If one zone seems weak or a damper is not responding, we tell you what we saw so you can follow it up with your air conditioning installer, rather than leaving it as a mystery for next summer.